Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Configuring after production ====== After the board has been produced it has to be configered once to be able to use it. This configuration includes three consequent steps: ===== Downloading the firmware to the PIC-microcontroller ===== **Comming soon** ===== Programming the test-bitfile into the serial Flash ===== **Comming soon** ===== Testing for correct functionality ===== **Comming soon** gecko4education/first_time_configuration.txt Last modified: 2021/12/20 10:49by 127.0.0.1