gecko3:standards:mechanical_standards

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
gecko3:standards:mechanical_standards [2017/03/06 12:22] – external edit 127.0.0.1gecko3:standards:mechanical_standards [2021/12/20 10:49] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ===== Mechanical standards ===== ===== Mechanical standards =====
 GECKO3 modules are about the size of a credit card - 85.50 mm long and 54 mm wide. Two 120-pin connectors are placed on one side of the board. To add extra mechanical stability, two pads with 2.5 mm holes are used which allow to use M 2,5 screws to fixate the whole stack of boards. Be sure to use spacers in the appropriate length between each pair of boards to prevent mechanical stress. GECKO3 modules are about the size of a credit card - 85.50 mm long and 54 mm wide. Two 120-pin connectors are placed on one side of the board. To add extra mechanical stability, two pads with 2.5 mm holes are used which allow to use M 2,5 screws to fixate the whole stack of boards. Be sure to use spacers in the appropriate length between each pair of boards to prevent mechanical stress.
-{{:huce:microlab:projects:internal:gecko:standards:gecko3standard-top.png?300|}}{{:huce:microlab:projects:internal:gecko:standards:gecko3standard-bottom.png?300|}}+ 
 +{{:gecko3:standards:gecko3standard-top.png?300|}}{{:gecko3:standards:gecko3standard-bottom.png?300|}}
  
 FIXME: Add real mechanical drawing with measures FIXME: Add real mechanical drawing with measures
  • gecko3/standards/mechanical_standards.1488802920.txt.gz
  • Last modified: 2021/12/20 10:49
  • (external edit)