Differences

This shows you the differences between two versions of the page.

--- gecko-systems:gecko3com:start [2017/03/10 14:06] – [Protocols] ghj1-local
+++ gecko-systems:gecko3com:start [2017/03/10 14:07] – [Protocols] ghj1-local
@@ Line 42: / Line 42: @@
 ==== Protocols ====
-All commands understood by the GECKO3COM are listed in the [[:systems:gecko3com:command_reference]]
+All commands understood by the GECKO3COM are listed in the [[gecko-systems:gecko3com:command_reference]]
 === SCPI ===
@@ Line 64: / Line 64: @@
 The GECKO3main module contains a EZ-USB processor to control the USB traffic. The EZ-USB acts as a command splitter.\\
-After the start up of a GECKO3main, the system is by default in the state where it listens on the USB port for TMC (see [[gecko-systems:gecko3com:start#usbtmc|USBTMC]]) or [[systems:gecko3com:start#firmware_update|DFU]] commands. The EZ-USB interprets and executes the commands. Since the FPGA is in this case empty no commands or data are forwarded from the USB to the FPGA.
+After the start up of a GECKO3main, the system is by default in the state where it listens on the USB port for TMC (see [[gecko-systems:gecko3com:start#usbtmc|USBTMC]]) or [[gecko-systems:gecko3com:start#firmware_update|DFU]] commands. The EZ-USB interprets and executes the commands. Since the FPGA is in this case empty no commands or data are forwarded from the USB to the FPGA.
-{{:huce:microlab:projects:internal:gecko:gecko3:gecko3com:beforecontentswitch.png|Before context switching. All commands are routed to the EZ-USB}}\\
+{{:gecko-systems:gecko3com:beforecontentswitch.png|Before context switching. All commands are routed to the EZ-USB}}\\
 **Before context switching:** All commands are routed to the EZ-USB